What Is Grubbing? Land Clearing Terms Explained

You got a bid back on your lot and it reads like a different language. Clearing, grubbing, root raking, stripping, a line for spoil and another for borrow, and you are not sure which of those you are paying for or why. None of it is complicated once somebody explains it in plain words, so here is the list, in roughly the order it happens on a lot.

Clearing, grubbing, root raking and stripping

Clearing is the part you can see from the road. The trees come down, the brush gets pushed, and the lot goes from woods to open ground. A pine and palmetto lot near Navarre or Holt clears fast. A lot choked with scrub oak and yaupon is slower, because there is more of it and it does not want to push.

Grubbing is the part you cannot see from the road, and it is the one that matters for anything you build. Clearing takes the tree off at the ground. Grubbing takes the stump and the roots out of it. Pine stumps come out clean in sand. Live oak roots run wide and shallow and take real digging. A lot that is cleared but not grubbed looks finished and is not, because stumps rot, and rotting wood under a pad settles and takes the slab with it.

Root raking is how the small stuff gets out. A rake on the front of a dozer or a skid steer combs the top of the ground and pulls up the roots and the chunks grubbing left behind. Palmetto is the one that fools people. The fronds push off easily, and the root mat under them is still there, dense and springy, until it gets raked and picked.

Stripping is taking off the topsoil, the dark organic layer that grew all those roots. It gets pushed to a pile to go back on the yard later, and it stays out from under the house, because organic material is the last thing you want under a slab.

Cut and fill, spoil and borrow

Cut and fill is the arithmetic of grading. A cut is dirt taken off a high spot. Fill is dirt placed in a low spot. On a lot sloping toward a bayou, the cut from the high side becomes the fill on the low side, and when the two come out even the lot balances. That is the cheapest lot to grade, because nothing leaves and nothing comes in.

Spoil is what leaves. It is the dirt, roots, and muck that came out of the ground and cannot be reused, so it gets loaded and hauled off. Hauling it is usually the biggest single line on a land clearing bid, because it comes down to load counts and how far the trucks have to run.

Borrow is what comes in. When a lot does not have enough good dirt of its own, fill gets hauled from a borrow pit. Ours is at 3125 River Rd in Navarre, and most of the pads we build near the coast come out of it. The dirt is borrowed from one place to build another. Nobody gives it back.

Rough grade, fine grade and lifts

Rough grade is the first pass with the machines. High spots get cut, low spots get filled, and the lot gets shaped to roughly the elevations on the plan. This is where the lot starts shedding water the right way.

A lift is one layer of fill. Fill goes in thin layers, each one rolled tight before the next goes on, because a roller can only compact so deep. Dump it all at once and roll the top and the middle stays loose. Lifts are the difference between a pad that holds and a pad that settles.

Fine grade is the last pass. The pad and the yard get brought to final elevations and smoothed, and the crown and the swales, covered next, get their shape. Fine grade is what your builder walks onto.

Crown and swale

A crown is a high point in the middle. A pad gets crowned so water runs off it in every direction instead of sitting on it, and a gravel driveway gets crowned for the same reason. You would never notice it standing on it, but the rain does.

A swale is a shallow grassed channel that carries water around something instead of through it, and around here that something is usually the house. A swale along the uphill side of a pad catches water coming off the neighbor's lot and walks it around to the ditch. It is nothing but shaped dirt with grass on it, and it does more work than people expect.

Silt fence and the construction entrance

Silt fence is the black fabric fence along the low side of a cleared lot. Its job is to hold the dirt on your property until grass is growing again. Storms on this coast come hard, and bare sugar sand near Gulf Breeze or Pensacola Beach moves in a single afternoon. The fence goes in before the machines start, trenched into the ground so water cannot run under it. We keep a state certified erosion control inspector on staff, so it gets set where it does something.

The construction entrance is a pad of rock where the driveway will go. Trucks drive across it instead of bare sand, so the lot does not rut and the road out front does not get smeared with mud. It goes in early, next to the silt fence, not at the end.

That is the whole vocabulary. Read your bid again with it in front of you, and if a line still does not make sense, ask whoever wrote it.

NOBL Sitework is a licensed general contractor (CGC1537340) clearing and grading lots across Santa Rosa, Okaloosa, Walton, Escambia, and Bay counties. If you have a bid in hand and a lot you are not sure about, call us at 850-238-3307 and we will walk it with you and go through it line by line.

Next
Next

Final Site Grading: Better Drainage and a Cleaner Look